Imagine this scenario—you acquire a new appliance, like a refrigerator or oven. It looks perfect, and you can’t wait to use it. But when it arrives, things don’t go as planned. It doesn’t fit properly, the connections don’t match, or it sustains damage before you can use it. Unbelievably, these issues arise often. Most homeowners face such issues due to minor, but critical appliance installation mistakes.
Selecting an appliance is one part of the job, but ensuring it’s set up correctly is a different story. This is where expert help comes in. As we’ve noticed at Universal Appliance and Kitchen Centre, these mistakes are more common than people think, leading to wasted time, extra costs, and a lot of stress. In this guide, we will go over five most common mistakes—and explain how our professional appliance installation in Los Angeles will let you avoid them without any hassle.
Mistake #1: Skipping Measurements and Space Planning
Not measuring and space planning prior to appliance installation is one of the worst mistakes many homeowners make, and this typically stems from not planning in advance.
Why Proper Measurement Matters
It’s always exciting to buy a new appliance, however, skipping the planning phase can lead to complications. For instance, a refrigerator that does not fit in the allocated space might be a terrible match for the area spatially. The following issues could arise if you don’t take the right measurements:
- Tight door clearances that stop the fridge or oven doors from opening fully
- Blocked walkways in tight kitchens or laundry rooms
- Ventilation issues that cause overheating or poor performance
- Missed utility hookups for water, gas, or electrical connections
All of the appliance fit issues mentioned above can lead to appliances not functioning properly, additional costs, increased delays, or even needing to fully exchange the unit.
What Should You Measure?
To avoid these problems, always check:
- Appliance height, width, and depth
- Doorways and hallways the appliance must pass through
- Cabinet and wall clearances for proper airflow
- Locations of power, gas, or water connections
Get It Right with the Pros
When it comes to installing appliances, measuring appliances properly goes beyond the simple tape measure. At Universal Appliance and Kitchen Center, we make sure that everything fits and that all steps are completed even before the appliance arrives. From the front door to the final location, we meticulously inspect every critical point to ensure the precise placement of each appliance within the designated space.
Explore Installation Services – Universal Appliance and Kitchen Center provides professional installation services, ensuring a hassle-free experience.
Mistake #2: Bad Gas or Electrical Connections
It is crucial to pay attention to how gas and electric appliances are connected. Wrong connections can pose serious threats and will definitely create financial damage.
What Can Go Wrong if You Do It Yourself
Connecting a gas or electric appliance without professional help might look straightforward, but poses the following risks:
- Gas leaks or fire risks if fittings aren’t sealed right
- Appliance issues from using the wrong power or gas pressure
- Breaking local safety rules, which can lead to fines
- Losing your warranty, since many brands require pro installation
Installation of a gas range in LA might come with specific requirements that often need to follow city codes or get permits. Skipping this step can cause big headaches later.
The Safe and Smart Way to Handle It
Wrong outlet usage, improper grounding, and unsecured wires are all common issues leading to electric oven setup problems. These small mistakes can cause massive issues in the future.
Because of issues like this, Universal Appliance and Kitchen Center sends trained technicians to ensure these setups are done correctly. If you have any doubts regarding your connections and local rules, it is always best to consult.
Contact Universal Appliance and Kitchen Center for installation that is guaranteed to be done safely and reliably.
Mistake #3: Not Making Sure the Appliance Is Level
If your appliance is sitting in place, that does mean it is installed correctly. In fact, it’s possible that it’s not sitting flat and level, which may cause it to have uneven appliance problems.
Why Leveling Is So Important
Many homeowners don’t realise how much difference a small tilt can make. This can lead to:
- A tilted dishwasher won’t be able to drain water correctly, sparking smells and stagnant water.
- An uneven fridge may never have its doors closed tight, so cool air escapes constantly.
- A slanted range can cause your food to cook unevenly or pans to slide around.
These issues will not arise immediately, however over time they will cause wear and tear to the appliance.
Let the Pros Handle It Right
Leveling a dishwasher or any other appliance requires more than sitting it on the floor. At Universal Appliance and Kitchen Center, our expert installers check every angle and utilize appropriate tools to adjust the feet or base accordingly so that the appliance operates appropriately.
For instance, if you are looking to buy a new range or fridge and want to ensure it is set up properly, we can assist. Shop Kitchen Appliances and leave the delivery and levelling care to our professionals.
Mistake #4: Not Protecting Floors, Walls, and Doorways
Large appliances such as refrigerators, washing machines, and ranges are bulky and heavy. Ideally, appliances should not be pushed, as such actions can cause:
- Scratched hardwood or tile floors
- Dented walls and baseboards
- Chipped paint around door frames
- Broken trim or damaged thresholds
These types of appliance delivery damage are more common than expected, especially when proper tools or techniques are not employed by appliance delivery workers.
Treat Your Home with Care
Every delivery should receive the same level of care as the expensive appliance. This is Universal Appliance and Kitchen Center’s motto, which differentiates them from the rest of the competitors. Our White Glove Delivery team provides safe drop-offs and is outfitted with:
- Protective floor pads and blankets
- Soft sliders to move heavy appliances without scratches
- Corner guards to shield walls and trim
- A careful plan for moving appliances without causing damage
We treat each delivery with the same level of care as the appliance itself. For instance, our team ensures complete protection and discretion from start to end if you are replacing an old refrigerator and worry about narrow hallways along the way.
Before your next delivery, consider whether your home will be safe during installation. Discover Universal Appliance and Kitchen Center White Glove Delivery service and enjoy damage-free delivery today.
Mistake #5: Skipping the Final Test After Installation
Placing your new appliance in its designated location is a wonderful achievement, but it isn’t the final step. Ensuring the appliance fully functions before the installation technician leaves is one of the most important—and often forgotten—aspects of the entire process.
Why Testing Is a Must
Imagine you get a new dishwasher installed. You look at everything, and it appears perfect, so the installer leaves. Then, two days later, you decide it’s time for the first-ever full load run and you come to find water pooling at the bottom or leaking out all over the floor. Now you have to deal with troubleshooting or paying to get a repair.
This is why test appliances after install is important. A simple test run can reveal:
- Leaks or drainage issues in dishwashers or washers
- Unusual noises in refrigerators or dryers
- Power or performance issues in ovens or cooktops
- Temperature problems in fridges or freezers
If the team is present, these issues can be fixed quickly, but it will take longer if they are not.
How Pros Handle the Final Step
Universal Appliance and Kitchen Center takes this final step seriously. Their installers don’t just drop off your appliance. They stay to turn it on, run through the settings, do the necessary calibrations, and final appliance check to ensure smooth operation.
As an example, if you’ve recently purchased a high-end washer or double oven, our team guarantees that a thorough test is done before they depart, allowing you to use it with confidence, not concern.
Universal Appliance and Kitchen Center Installation comes with an option of professional installation that ensures no matters are left unresolved.
The Takeway
The process of installing a new appliance seems straightforward, however, small mistakes like wrong measurements, wrong connections, and skipping final tests can leads to significant problems. These simple mistakes can cause a frustrating scenario that includes damaged floors, performance issues, or voided warranties, turning your exciting purchase into a stressful situation.
This is the reason why most of the residents have opted for professional appliance installation in Los Angeles. At Universal Appliance and Kitchen Center, we provide expert planning and white glove installation, along with meticulous testing so that the appliance is operational immediately.
For example, a homeowner placed an order for a new fridge or stove, they wouldn’t want waiting hours and potential house damages. Booking a Universal Appliance and Kitchen Center appliance delivery means rest assured that both the delivery and installation are done to satisfaction.
Find a Universal Appliance and Kitchen Center Showroom and we will assist you and provide the details of worry-free installations.